Specifications

monogram.com
57
Profes sional ga s c ooktop s
Gas coo kt opsElec tric cookt ops
16" Min
Junction
Box
605Dia125
Electrical requirements
Product rating is 120/208 or 120/240V, 60Hz, 36" cooktops
require a 50-amp circuit; and 30" cooktops require a 40-amp
circuit. The cooktops must be connected to a supply circuit of
the proper voltage and frequency and protected by a time-
delay fuse or circuit breaker.
Combination installations
Consideration must be given to electrical supply locations when
the cooktop is installed with other products in the same cabinet.
Always refer to each product’s installation instructions for
clearances and electrical requirements.
• Install these cooktops with any exhaust hood of the same or
greater width; 300 CFM or greater air flow rating is recommended.
• The 30" cooktop may be installed in combination with a
Monogram 30" downdraft vent. Install the 36" cooktop with
a 36" downdraft vent. See downdraft vents for details.
• A Monogram single oven may be installed below these cooktops.
The serial plate is located on the bottom of the cooktops.
All models require 12"
minimum clearance below
the cooktop bottom to
combustible materials.
Advance planning for induction cooktops
ZHU30RSMSS Stainless Metallic
ZHU30RBMBB Black
30" induction cooktop (in inches)
A B (depth at sides) B (at center)
ZHU30RSMSS 29-7/8" 20-15/16" 21-1/2"
ZHU30RBMBB 29-3/4" 20-13/16" 21-3/8"
605Dia124
A
28-1/2"
2" Min.
to Side Walls
B
2-1/2" Min.
to Front Edge
1-3/4"
Min.
19-5/8"
ZHU36RSMSS Stainless Metallic
ZHU36RBMBB Black
36" induction cooktop (in inches)
A B (depth at sides) B (at center)
ZHU36RSMSS 36-1/8" 20-15/32" 21"
ZHU36RBMBB 36" 20-5/16" 20-7/8"
605Dia123
A
33-7/8"
2" Min.
to Side Walls
B
2-1/2" Min.
to Front Edge
1-3/4"
Min.
19-1/8"
Indu ction cookt ops
3-1/4"
4-5/8" at
Front Baffle
Note: When the cooktop
is installed over an oven,
the baffle at the front is
not required.