Specifications

64
Advance planning for chimney hoods—wall-mount
Product dimensions and clearances
This stainless steel hood can be installed over any Monogram
®
cooktop including a professional 36" cooktop and a 36" or 30"
professional range.
This vent hood must be installed 24" min. to 30" max. above
the cooking surface. The hood installation height, from the
cooktop surface to the bottom of the hood, depends upon
ceiling height.
Model ZV950SDSS
* 24-1/2" for 8-ft. ceiling
36-1/2" for 9-ft. ceiling
36" to 44" for 9-ft. to 10-ft.
ceiling. (for ceilings between
9'6" and 10 ft. mount
the hood 30" above the
cooking surface).
Note: The supplied two-piece duct cover is adjustable to
fit 8-ft. to 10-ft. ceilings. For ceiling heights greater than
10 ft. and up to 14 ft., order ZX14SDSS stainless steel duct
cover accessory.
The distance between the cooking surface and the bottom
of the hood should be:
25-1/2" max. for 8-ft. ceiling height.
25-1/2" to 30" for 9-ft. ceiling height.
30" min. for 10-ft. ceiling height.
Plan the installation height carefully to avoid unsightly gaps
above the hood.
Note: Install the hood 30" min. above the cooking surface
over a professional range or cooktop.
Installation over a professional range
or cooktop
The ZV950 hood must be installed 30" minimum above the
cooking surface of a professional range or cooktop. The ceiling
height must be at least 8' 5" for this installation combination.
10"
*Height
to Ceiling
35-5/8"
605Dia146
25"
605Dia147
Installation
Height Depending
on Ceiling Height
36" Min.
Using duct cover accessories
A duct cover accessory may be required for your hood
installation height. Use this chart to accurately determine
installation height and the need for a duct cover accessory.
ZV950SDSS installation heights
Actual Possible hood Duct
ceiling installation cover
height height* accessory
7' 11" 24-1/2" Supplied
8' 0" 25-1/2" Supplied
8' 1" 25-1/2" to 26-1/2" Supplied
8' 2" 25-1/2" to 27-1/2" Supplied
8' 3" 25-1/2" to 28-1/2" Supplied
8' 4" 25-1/2" to 29-1/2" Supplied
8' 5" 25-1/2" to 30" Supplied
8' 6" 25-1/2" to 30" Supplied
8' 7" 25-1/2" to 30" Supplied
8' 8" 25-1/2" to 30" Supplied
8' 9" 25-1/2" to 30" Supplied
8' 10" 25-1/2" to 30" Supplied
8' 11" 25-1/2" to 30" Supplied
9' 0" 25-1/2" to 30" Supplied
9' 1" 26-1/2" to 30" Supplied
9' 2" 26-1/2" to 30" Supplied
9' 3" 26-1/2" to 30" Supplied
9' 4" 26-1/2" to 30" Supplied
9' 5" 26-1/2" to 30" Supplied
9' 6" 30" Supplied
9' 7" 30" Supplied
9' 8" 30" Supplied
9' 9" 30" Supplied
9' 10" 30" Supplied
9' 11" 30" Supplied
10' 0" - 14" 0" 30" ZX14SDSS
*Based on 36" countertop height.
ZV950DSS duct
cover dimensions
ZX14DSS duct
cover dimensions
The serial plate is located behind the removable filters.