Specifications
70
Advance planning for chimney hoods—island
23-1/4”
24-3/4”
14”
12-3/16”
Side
Trim
Side
Trim
Product dimensions and clearances
This glass canopy hood can be installed over any Monogram
®
cooktop (except Professional models).
27 9/
16
"
3 1/4"
35 7/8"
*Height
to
Ceiling
Determine installation height
Use this chart to accurately determine installation heights,
depending on your ceiling heights.
24" Min.
30" Max.
36" Min
.
ZV925SLSS duct cover dimensions
The serial plate is located behind the removable filters.
Model ZV925SLSS
* The supplied duct
cover is sized to
fit 8' to 9' ceiling
heights.
For 9'1" to 10'1"
ceilings, order
ZX92510.
NOTE: ZX92510 accessory
consists of one 36-3/4" long
duct cover.
NOTE: Measure
installation height
from the cooking
surface to the outer
glass portion of
the hood.
• This hood must be installed 24" min. and 30" max. above the
cooking surface. The cooking surface should be at least 36"
above the floor.
Important
• The hood installation height depends on the ceiling
height. Use the chart shown to determine the EXACT
installation height.
• Duct cover side trim pieces are provided and must be used
to cover installation screws. They are sized to fit the specific
installation heights shown in the chart.
• This hood can be installed for recirculating operation.
No kits required.
ZV925 installation heights
Possible
ceiling height
Hood
installation
height*
Mounting
frame
height
Duct cover
accessory
7' 11" 25" 30-1/2" Supplied
8' 0" 27" 30-1/2" Supplied
8' 1" 24" 34-1/2" Supplied
8' 1" 28" 30-1/2" Supplied
8' 2" 25" 34-1/2" Supplied
8' 2" 29" 30-1/2" Supplied
8' 3" 26" 34-1/2" Supplied
8' 3" 30" 30-1/2" Supplied
8' 4" 27" 34-1/2" Supplied
8' 5" 24" 38-1/2" Supplied
8' 5" 28" 34-1/2" Supplied
8' 6" 25" 38-1/2" Supplied
8' 6" 29" 34-1/2" Supplied
8' 7" 26" 38-1/2" Supplied
8' 7" 30" 34-1/2" Supplied
8' 8" 27" 38-1/2" Supplied
8' 9" 24" 42-1/2" Supplied
8' 9" 28" 38-1/2" Supplied
8' 10" 25" 42-1/2" Supplied
8' 10" 29" 38-1/2" Supplied
8' 11" 26" 42-1/2" Supplied
8' 11" 30" 38-1/2" Supplied
9' 0" 27" 42-1/2" Supplied
ZV92510 accessory duct cover
9' 1" 24" 46-1/2" ZX92510
9' 1" 28" 42-1/2" ZX92510
9' 2" 25" 46-1/2" ZX92510
9' 2" 29" 42-1/2" ZX92510
9' 3" 26" 46-1/2" ZX92510
9' 3" 30" 42-1/2" ZX92510
9' 4" 27" 46-1/2" ZX92510
9' 5" 24" 50-1/2" ZX92510
9' 5" 28" 46-1/2" ZX92510
9' 6" 25" 50-1/2" ZX92510
9' 6" 29" 46-1/2" ZX92510
9' 7" 26" 50-1/2" ZX92510
9' 7" 30" 46-1/2" ZX92510
9' 8" 27" 50-1/2" ZX92510
9' 9" 24" 54-1/2" ZX92510
9' 9" 28" 50-1/2" ZX92510
9' 10" 25" 54-1/2" ZX92510
9' 10" 29" 50-1/2" ZX92510
9' 11" 26" 54-1/2" ZX92510
9' 11" 30" 50-1/2" ZX92510
10' 0" 27" 54-1/2" ZX92510
10' 1" 28" 54-1/2" ZX92510
*Based on 36" countertop height.