Specifications

monogram.com
71
Chi mne y h oo ds
Pro fes sio nal ho od sCu sto m hoo d inse r t sTel esc opic
do wndr af t ve nts
Advance planning for chimney hoods—island
Product dimensions and clearances
This stainless steel hood can be installed over any Monogram
cooktop or range, including professional models.
Model ZV1050SFSS
* 20" for 8-ft. ceiling using
supplied duct cover
32" for 9-ft. ceiling using
ZX1059SFSS accessory
44" for 10-ft. ceiling using
ZX10510SFSS accessory
This vent hood is supplied with a decorative duct cover to
reach 8-ft. ceiling height, or between 7' 11" and 8' 1".
*9-ft. to 10-ft. ceilings may be 25-1/2" to 30" clearance.
This vent hood must be installed 25 1/2" min. and 30" max . above
the cooking surface.
The distance between the cooking surface and the bottom of the
hood must be at least 25-1/2". The 30" recommended installation
height above the standard 36" countertop will ensure duct
cover fit to the ceiling. For 9-ft. and 10-ft. ceiling heights, the
hood may be lowered to 25-1/2" over the cooking surface.
• When installing this island hood above a Monogram
professional range or cooktop, installation clearance must
be at least 30".
Important: Clearances may vary due to type of cooking
product and local codes. Check with local inspectors to be
sure the standard is applicable.
605Dia153
10"
*Height
to Ceiling
42"
31-1/2"
605Dia172
*30"
Recommended
36" Min.
Using duct cover accessories
A duct cover accessory may be required for your hood
installation height. Use this chart to accurately determine
the need for a duct cover accessory.
ZV1050SFSS installation heights
Actual Possible hood Duct
ceiling installation cover
height height* accessory
7' 11" 29" Supplied
8' 0" 30" Supplied
8' 1" 30" Supplied
8' 2" 25-1/2" to 30" ZX1059SFSS
8' 3" 25-1/2" to 30" ZX1059SFSS
8' 4" 25-1/2" to 30" ZX1059SFSS
8' 5" 25-1/2" to 30" ZX1059SFSS
8' 6" 25-1/2" to 30" ZX1059SFSS
8' 7" 25-1/2" to 30" ZX1059SFSS
8' 8" 25-1/2" to 30" ZX1059SFSS
8' 9" 25-1/2" to 30" ZX1059SFSS
8' 10" 25-1/2" to 30" ZX1059SFSS
8' 11" 25-1/2" to 30" ZX1059SFSS
9' 0" 25-1/2" to 30" ZX1059SFSS
9' 1" 25-1/2" to 30" ZX10510SFSS
9' 2" 25-1/2" to 30" ZX10510SFSS
9' 3" 25-1/2" to 30" ZX10510SFSS
9' 4" 25-1/2" to 30" ZX10510SFSS
9' 5" 25-1/2" to 30" ZX10510SFSS
9' 6" 25-1/2" to 30" ZX10510SFSS
9' 7" 25-1/2" to 30" ZX10510SFSS
9' 8" 25-1/2" to 30" ZX10510SFSS
9' 9" 25-1/2" to 30" ZX10510SFSS
9' 10" 25-1/2" to 30" ZX10510SFSS
9' 11" 25-1/2" to 30" ZX10510SFSS
10' 0" 25-1/2" to 30" ZX10510SFSS
*Based on 36" countertop height.
ZV1050 duct cover dimensions
Model Accessory A B
ZV1050 Supplied
11-1/2" 12"
ZV1050 ZX1059
19" 20"
ZV1050 ZX10510
25" 26"
The serial plate is located behind the
removable filters.