Specifications

8
Advance planning for built-in custom side-by-side refrigerators
3/4" overlay panel dimensions
194Dia64
Fresh Food
Panel
Freezer
Panel
E
D
F
G
A
B
Grille Panel
C
Dispenser
Cutout
9-5/8"
194Dia63
Dispenser Cutout
15-3/8"
194Dia58
3/4"
Overlay
Panel
1/4"
Backer
Panel
Door
.10"
Spacer
For a more custom appearance,
overlay panels may be installed
on trimmed models. The overlay
panel must be secured to a
1/4"-thick backer panel which
slides into the trim. A spacer
panel 0.10" thick must be
placed between the overlay
and backer panels.
Raised overlay panel design
on dispenser models
When a raised panel design is to be used, a custom wide
middle rail is required to accept the dispenser trim.
• The middle rail must be wide enough to allow for the
dispenser trim to overlap the opening.
• The middle rail must be 1.100" total thickness to accept the
dispenser trim.
.250" + .10" + .750" = 1.100"
Total panel thickness
Note: Left-to-right offset
is not always equal to
top-to-bottom offset.
36" side-by-side (in inches)
A B C D E
1/4" backer panel 33-7/8 9 68-3/8 14-9/16 18-9/16
.10" spacer panel 33 8-3/8 67 13-1/4 17-1/4
3/4" spacer panel 34-1/8 9-1/4 68-5/8 14-13/16 18-13/16
42" side-by-side (in inches)
A B C D E
1/4" backer panel 39-7/8 9-1/2 68-3/8 14-9/16 24-9/16
.10" spacer panel 39 8-5/8 67 13-1/4 23-1/4
3/4" spacer panel 40-1/8 9-3/4 68-5/8 14-13/16 24-13/16
48" side-by-side (in inches)
A B C D E
1/4" backer panel 45-7/8 9-1/2 68-3/8 18-9/16 26-9/16
.10" spacer panel 45 8-5/8 67 17-1/4 25-1/4
3/4" spacer panel 46-1/8 9-3/4 68-5/8 18-13/16 26-13/16
*Dispenser cutout position (in inches)
F G
36" models 17-15/16 3-1/4
42" models 17-15/16 3-1/4
48" models 17-15/16 5-1/4
Important note: Maximum weight for fresh food panel is 75
pounds, 53 pounds for freezer panel and 18 pounds for the
grille panel.
* Cut the dispenser opening after the backer, spacer and
overlay panels have been assembled.
Center each panel over
the other. Assemble the
panels with glue and
screws. Screws must be
countersunk into
the backer panel.
194Dia65
Spacer Panel
Overlay Panel
Backer Panel
1/4" Backer Panel
.10" Spacer
3/4" Overlay Panel
Wide
Middle
Rail is
Required
194Dia82
Dispenser
Trim
16-3/4"
10-5/8"
Side view