Specifications

monogram.com
8989
Trivection
®
wall ovens
Conve ction wall ove ns
Advance planning for LCD touchscreen, integrated
and professional convection wall ovens
28-1/2" Min.
28-5/8" Max.
27-1/4" Min.
27-5/16" Max.
23-1/2"
Min.
Locate Junction Box 22"
Above Cutout Floor, Within 5"
of Right Rear Wall
30"
28-1/4"
23-1/4"
Recessed
Depth
29-3/4"
32-1/2"
LCD touchscreen single oven
ZET1RMSS
Stainless steel
Integrated single oven
ZET1SMSS
Stainless steel
Professional single oven
ZET1PMSS
Stainless steel
28-1/2" Min.
28-5/8" Max.
51-13/16"
Min.
51-15/16"
Max.
23-1/2"
Min.
12"
Locate Junction Box 47"
Above Cutout Floor, Within 5"
of Right Rear Wall
30"
52-7/8"
23-1/4"
Recessed
Depth
29-3/4"
Locate Junction Box Within
5" of the Right Rear Wall
23-1/2" Min.
27-1/4" Min.
27-5/16" Max.
25"
36"
Countertop
Height
1-1/2" Cabinet Top
Elevate the oven floor to desired height.
The support must be level, rigidly mounted
and capable of supporting 175 lbs.
625Dia9
28-1/2" Min.
28-5/8" Max.
LCD touchscreen double oven
ZET2RMSS
Stainless steel
Integrated double oven
ZET2SMSS
Stainless steel
Professional double oven
ZET2PMSS
Stainless steel
Cutout and product dimensions
The LCD touchscreen ovens with proximity sensor provide easy,
intuitive access to oven functions and options
The Integrated ovens offer contemporary styling with the
signature Monogram
®
tubular handles. The professional oven
design combines rugged stainless steel construction with refined
styling. Both are designed to fit into a 30"-wide cabinet.
Electrical requirements
Product rating is 120/208 or 120/240V, 60Hz. Connect to a
40-amp circuit for double ovens and 20-amp circuit for single
ovens. The ovens must be connected to a supply circuit of the
proper voltage and frequency and protected by a time-delay
fuse or circuit breaker.
Installation below a countertop
A single oven can be installed beneath countertops and below
approved cooktops. Always refer to the cooktop installation
instructions for electrical requirements and clearances.
monogram.com
89
Side-by-side installations
Install two ovens in separate cutouts. Allow 2" minimum
between the cutouts.
2″ (5.1 cm)
Min.
Cutout –
Observe all
dimensions
and
requirements.
Cutout –
Observe all
dimensions
and
requirements.