Specifications

monogram.com
9191
Trivection
®
wall ovens
Conve ction wall ove ns
Advance planning for electronic convection wall ovens
Electrical requirements
Product rating is 120/208 or 120/240V, 60Hz. Connect to a
40-amp circuit for double ovens and 20-amp circuit for single
ovens. The ovens must be connected to a supply circuit of the
proper voltage and frequency and protected by a time-delay
fuse or circuit breaker.
Cutout and product dimensions
27-1/4" Min.
27-5/16" Max.
28-1/2" Min.
28-5/8" Max.
23-1/2"
32-1/2"
Locate Junction Box 22"
Above Cutout Floor, Within 5"
of Right Rear Wall
605Dia92
30"
23-1/4"
Recessed
Depth
28-1/4"
29-3/4"
28-1/2" Min.
28-5/8" Max.
51-13/16"
Min.
51-15/16"
Max.
23-1/2"
12"
Locate Junction Box 47"
Above Cutout Floor, Within 5"
of Right Rear Wall
605Dia91
30"
52-7/8"
23-1/4"
Recessed
Depth
29-3/4"
23-1/2"
Min.
27"
32-1/2"
Locate Electrical Outlet Within 10"
of Left Side of Opening 22" Above
Cutout Floor or 5" Below Cutout Floor
605Dia94
25" Min.
25-1/4" Max.
27-5/8" Min.
28-1/8" Max.
29"
26-5/8"
23-1/4"
Recessed
Depth
30" single ovens
ZET938SMSS
Stainless steel
ZET938BMBB
Black
ZET938WMWW
White
30" double ovens
ZET958SMSS
Stainless steel
ZET958BMBB
Black
ZET958WMWW
White
27" single ovens
ZEK938SMSS Stainless steel
ZEK938BMBB Black
13-1/4"
27"
23-1/2"
10"
49-11/16"
Min.
50-1/8"
Max.
Locate Electrical Outlet Within 10"
of Left Side of Opening and 44" Above
Cutout Floor or 5" Below Cutout Floor
605Dia93
25" Min.
25-1/4" Max.
51"
26-5/8"
23-1/4"
Recessed
Depth
27" double ovens
ZEK958SMSS Stainless steel
ZEK958BMBB Black
30" single oven
side-by-side installations
Install two ovens in separate cutouts. Allow 2" minimum
between the cutouts.
2″ (5.1 cm)
Min.
Cutout –
Observe all
dimensions
and
requirements.
Cutout –
Observe all
dimensions
and
requirements.