Specifications

98
General features
Sophisticated styling. Built-in design with hidden controls offers
a look of understated elegance. For a personal statement,
customize the drawer with a cabinet-compatible wood panel
and your choice of handles.
Temperature settings. Monogram
®
warming drawers offer a
range of temperature options, from a proof setting (approximately
75°F) to a high setting (approximately 230°F).
Humidity control. By opening or closing the warming drawer vent,
you can keep foods crisp or maintain moisture.
Practical details. The design of the half rack not only
distributes heat evenly, but it also provides fifty percent
more surface area for stacking plates and food.
Installation versatility. All 30" and 27" warming drawers are
UL listed for use with Monogram wall ovens and cooktops.
Three-pan set. A set of three covered pans allows a choice of
sizes for any dish: one 6-quart pan and two 3-quart pans.
For additional details on product installation, warranty coverage,
care and maintenance, visit monogram.com.
Warming drawers
30" warming drawer
ZTD910SFSS, ZTD910WFWW and
ZTD910BFBB
Overall dimensions
(WxHxD in inches):
30 x 10-1/2 x 23-1/4
Amps @120VAC 15
Approx. shipping wt. (lbs.) 65
• Optional custom wood
panel kit
• Side-by-side installation
• Undercounter installation
• Under wall oven installation
• Under cooktop installation
ZTD910BB
27" warming drawer
ZKD910SFS and ZKD910BFBB
Overall exterior dimensions
(WxHxD in inches):
26-3/4 x 10-1/2 x 23-1/4
Amps @120VAC 15
Approx. shipping wt. (lbs.) 59
• Optional custom wood
panel kit
• Side-by-side installation
• Undercounter installation
• Under wall oven installation
• Under cooktop installation
ZTD910BB
Electrical requirements
Product rating is 120V, 60Hz, and connected to an
individual, properly grounded branch circuit and protected
by a 15- or 20-amp circuit breaker or time-delay fuse.
Two warming drawers installed side by side can operate
from the same duplex outlet.
Custom panels and handles
The drawer fronts can be removed and replaced with a
custom panel to match surrounding cabinetry.
• Order ZXD30B for 30"-wide models and ZXD27B for 27"
models. These kits must be ordered separately from your
Monogram supplier.
• The tubular handle may be reinstalled onto the custom panel
(longer screws will be required) or replaced with a custom
handle of your choice.
26-3/4" for 27" Models
30" for 30" Models
10-1/2"
1-13/16"
1-3/4"
Drill 5/16" Dia.
Through Custom
Panel For Lamp Jewel
605Dia102
Advance planning for warming drawers