CONTENTS INTRODUCTION ................................................................................................................................................................................................ 3 FEATURES .............................................................................................................................................................................................................. 3 CUSTOMER SERVICE.............................................................
INTRODUCTION This Wireless Smart Door/Window Sensor allows you to remotely monitor your home using your Android™ or iOS® smartphone or tablet. The sensor communicates with your phone through your local Wi-Fi® network, so you won't need any separate mesh network hubs or controllers. Mount it to a door, window, or other entryway to detect when it is opened or closed and receive notification directly to your mobile devices.
PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. Note that the 33049 version is a 2-pack version of 33048, so will contain twice as many of each item listed here.
PRODUCT OVERVIEW PHYSICAL INSTALLATION 1. Determine the mounting location. Note that the arrow on the magnet should be situated next to the arrow on the sensor with no more than a 0.4" (10mm) gap between the sensor and the magnet. Use a pencil to mark the locations. Ensure that the surfaces inside the marked locations are clean and free of dust and finger oils. The sensor should be placed indoors and away from water and other extreme weather conditions.
2. Using a small flat-head screwdriver, remove the cover from the magnet, as shown in the image to the right. 3. If you will be mounting the magnet with screws, use two of the provided screws to secure the magnet back to the wall at the desired location previously marked.
APP INSTALLATION AND LOGIN 1. Download and install the free STITCH by Monoprice app from Google Play™ or the App Store. Scan one of the two QR codes below to go directly to the appropriate app store. 2. Once it has been installed, launch the app. 3. If you have already used the STITCH app, tap the Login button, then enter your STITCH account information. If you have not installed and used the STITCH app before, proceed to app registration.
ADD A DEVICE Smart Inclusion Installation Smart Inclusion is the default mode for installing your device. It uses your wireless network to communicate between your smartphone and the smart device. If you do not have a Wi-Fi® network or do not wish to include the sensor in your network, see the AP Mode Installation section. 1. Tap + on the Add Devices screen to add a new device. 2. Scroll through the list and select Door Sensor or Window Sensor to add your new device to the STITCH app.
3. The LED indicator should be flashing red rapidly, indicating that it is ready to be paired with your network. Tap Confirm on the app to continue, input the password to your wireless network, then tap Confirm again. 4. The app will start connecting to the device. Tap Done once it is completed.
5. If the LED is not flashing red rapidly, open the cover and hold the Setup button for 5 seconds. The LED will flash red rapidly, indicating the device has been successfully reset. AP Mode Installation AP mode differs from Smart Inclusion mode in that it does not use your Wi-Fi® network to manage the communications between your smartphone and the device. Instead, it connects your phone's Wi-Fi directly to the device's built-in hotspot network. 1. Launch the STITCH by Monoprice app. 2.
4. Tap AP Mode at the top right. 5. The LED should be slowly blinking, indicating that it is ready to be added in AP mode. If it does begin blinking slowly, tap Confirm on the app to continue, input the password to your wireless network, then tap Confirm again.
6. In the wireless settings on your phone, select the Stitch-XXXX entry, then tap Connect Now to continue. The app will begin connecting to the device.
TECHNICAL SUPPORT Monoprice is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable Tech Support Associates. Technical support is available through the online chat button on our website www.monoprice.com during regular business hours, 7 days a week.
REGULATORY COMPLIANCE Notice for FCC Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Radio Notice for Industry Canada Caution This IC RSS-210 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. This device complies with IC RSS-210.