User Manual

10
5. If the LED is not flashing red rapidly, open the cover and hold the Setup button for 5
seconds. The LED will flash red rapidly, indicating the device has been successfully
reset.
AP Mode Installation
AP mode differs from Smart Inclusion mode in that it does not use your Wi-Fi® network to
manage the communications between your smartphone and the device. Instead, it
connects your phone's Wi-Fi directly to the device's built-in hotspot network.
1. Launch the STITCH by Monoprice app.
2. Tap + on the Add Devices screen to add a new device.
3. Scroll through the list and select Door Sensor or Window Sensor to add your new
device to the STITCH app.