User Manual

2. Using a small flat-head screwdriver, remove the cover from

the magnet, as shown in the image to the right.

3. If you will be mounting the magnet with screws, use two

of the provided screws to secure the magnet back to the

wall at the desired location previously marked. Otherwise,

peel the protective film from one side of one of the

included adhesive tape pieces and attach it to the back of

the magnet back plate, then remove the other protective

film and secure the magnet back plate to the wall at your desired

location.

4. Reinstall the cover on the magnet body.

5. Press the latch button on the sensor and remove the sensor back

plate from the main sensor body.

6. If you will be mounting the sensor with

screws, use two of the supplied screws to

secure the sensor back plate to the wall,

window, window frame, door, or door frame

at the marked location. Alternatively, peel the

protective film from one side of one of the

included adhesive tape pieces and attach it to the back of the sensor back plate,

then remove the other protective film and secure the sensor back plate and tape at

your desired location.

7. Insert the two included AAA batteries into the battery compartment on the main

sensor body, taking care to match the polarity, then reinstall the main sensor body

onto the sensor back plate.