User's Manual

5
English
Keys and Parts
The headset contains the following parts:
Before using the headset, you must charge the battery and pair
the headset with a compatible device.
1. Multifunction key
2. Track back
3. Volume down
4. Indicator lights
5. Play/Pause key
6. Track forward
7. Volume up
8. Charger connect
9. Microphone
10. 3.5mm cable port
10
9
8
7
6
5
4
3
2
1
Charge the Battery
The headset contains a Micro USB cable
that can be connected to your computer
or other device made for USB charging.
Plug the Micro USB end of the included
USB cable into the USB micro port charger
connector under the left earcup of the
headphone. Plug the other end into a USB
port on your computer or other devices
made for USB charging. The indicator
light will be red while charging. Once
fully charged, the indicator light will be
a steady green. Charge time is 1.5 hours
on an empty battery. The fully charged
battery has power for up to 10 hours talking
and/or music time and up to 100 hours
standby time.
Note
You can still enjoy your music while charging your headphone.
Warning
(1) Please pay attention to the environmental aspects
of battery disposal. Battery must be recycled or disposed
of properly. (2) Batteries (battery pack or batteries installed)
should not be exposed to excessive heat, such as sunshine,
fire, or the like.