User's Manual

6
English
Pairing
1. Ensure that your phone or music player is switched on.
2. To pair the headset if it has not been previously paired
with a device, switch on the headset. The headset enters
the pairing mode, and the blue and red indicator light starts
to flash quickly. To pair the headset if it has been previously
paired with another device, ensure that the headset
is switched off, and press and hold the multifunction key
(for about five seconds) until the blue and red indicator
light starts to flash quickly.
3. Activate the Bluetooth
®
feature on your phone or music
player, and set it to search for Bluetooth devices.
4. Select “Beats Wireless” from the list of found devices
on your phone or music player.
5. If necessary, enter passcode 0000 to pair and connect
the headset to your device.
Adjust the Volume
To adjust the headset volume, press the volume up or down
key during a call or while listening to music. To adjust the volume
quickly, press and hold either key.
Warning
Excessive sound pressure from earphones and headphones
can cause hearing loss.
Switch On
To switch on, press and hold the
multifunction key about two seconds.
The headset beeps ascending tones,
and the blue indicator light is briefly
displayed. When the headset tries to
connect to the last used phone or music
player, the red indicator light flashes
slowly. When the headset is connected
to a device and is ready for use, the blue
indicator light flashes slowly. If the headset
has not been paired with a device, it
automatically enters the pairing mode.
Switch Off
To switch off, press and hold the multifunction key for about three
seconds. The headset beeps descending tones, and the red
indicator light is briefly displayed. If the headset is not connected
to a device within 10 minutes, it switches off automatically.