Owner’s Manual Ceiling Fan Installation Instructions Total fan weight For 5BY52XX Series Fans READ AND SAVE THESE INSTRUCTIONS Quality Ceiling fans
Installation SAFETY TIPS WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 701999), including fire-rated construction. Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.
7 Insert downrod into yoke on top of fan body. Align the hole in the downrod with hole in the yoke. Insert pin through the yoke and downrod until the point appears on the other side. Install the keeper. 10 8 9 Tighen set screws and nuts to secure downrod in yoke. Check the fan motor for shipping stabilizer and remove if present.
19 20 21 Install switch plate by placing over the 2 screws and twisting into place. Install screw removed and tighten all 3 screws securely. Push plug from fan and plug from switch plate together. Remove the 3 screws from switch cap. 22 Install switch cap into switch plate housing, align the 3 holes and install 3 screws and tighten securely.
Trouble Shooting If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.
