Use and Care Guide

6
© 2018 Monte Carlo Fan Company
10/2018
17 18 19
20
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
Connect light lead wires from fan to the
lead wires from LED light fixture with
quick connectors. Make sure the quick
connectors are firmly clasped.
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the screw removed in step 17.
Tighten all screws securely.
Attach glass by locating dimples in light
pan with grooves on the glass and twist
clockwise until tight.
Glass
LED light fixture