Instructions / Assembly

Installation

MONTEAUX LIGHTING

™

Please contact 1-800-446-9092 for further assistance.

Assembling the light ﬁxture

 Screw the rods (C) to the top of the light ﬁxture (A).

Make sure to feed the branch wires through the rods

during assembly.

 Attach the quick link (D) to the top rod (C).

 Attach the crystals (E) to the light ﬁxture (A).

Attaching the mounting unit and

canopy to the junction box

 Attach the mounting unit (AA) to the junction box (not

included) with the mounting screws (BB) and remove the

pre-installed screw collar ring.

 Place the canopy (B) over the pre-installed screw collar loop

on the mounting unit (AA). Turn the screw collar ring until

1/2 of the screw collar loop threads are exposed.

 Secure the quick connector (D) to the screw collar loop on

the mounting unit (AA. Lower the screw collar ring and

canopy (B) over the quick connector (D).

 Weave the electrical wires, ground wires and safety cable

through the quick connector (D), screw collar loop, canopy

(B) and through the center of the mounting unit (AA).