User Manual

Table Of Contents

ADDING IN A SUBHARMONIC OSCILLATOR

Rotate the SUB 1 LEVEL knob clockwise and you will hear

the sound of the ﬁrst subharmonic oscillator associated

with VCO 1 mixed in with the sound of VCO 1. With the

SUB 1 FREQ knob all the way clockwise, VCO 1 and SUB 1

are playing in unison. As you rotate the SUB 1 FREQ knob

slowly counter-clockwise, you will hear the pitch of SUB 1

step through the available undertones.

EXPLORING YOUR SUBHARMONICON (Continued)

CREATING A SEQUENCE

INTRODUCTION

Before we can create a sequence, we need to let Subharmonicon

know what our intentions are. First, press the OSC 1 button (located

in the SEQ 1 ASSIGN buttons) so that it is lit. This allows the

individual STEP knobs of Sequencer 1 to modify the pitch of VCO 1.

Next, press the SEQ 1 button (located under the RHYTHM 1 knob) so that it is

lit. This step attaches a rhythm source to Sequencer 1, so that we can use the

NEXT and RESET buttons to navigate the individual steps of Sequencer 1.

Finally, use the SEQ OCT button to select the range, in octaves, of the

sequencer STEP knobs. An LED will indicate the current selection. Use the

SEQ OCT button to cycle through the available options. For now, let’s use

the ±2 option.

Press the RESET button to return the sequencer(s) to Step 1.

This will also reset the rhythm generators to their starting position.