User Manual

34
ROW FOUR
VCO 2 OUTPUT
The audio output of VCO 2 is available at this jack.
AUDIO/CV OUTPUT: 10V peak to peak
VCO 2 SUB 1 OUTPUT
The audio signal of VCO 2, Subharmonic Oscillator 1 is available here.
AUDIO/CV OUTPUT: 10V peak to peak
VCO 2 SUB 2 OUTPUT
The audio signal of VCO 2, Subharmonic Oscillator 2 is available here.
AUDIO/CV OUTPUT: 10V peak to peak
CUTOFF INPUT
A control signal connected to this input jack can be used to control the Cuto
Frequency of the Subharmonicon Filter. With the CUTOFF knob centered, the
signal received here can sweep the Cuto Frequency through a range of up to
± 5 octaves.
CV INPUT: -5V to +5V
ROW FIVE
PLAY INPUT
A gate signal received here will toggle the status of the PLAY button.
The PLAY button is still available for manual operation. Pressing the PLAY
button will override the status of the PL AY button caused by a control signal
received here.
CV INPUT: 0V to +10V
(Rising edge = PLAY begins; Falling edge = PLAY stops)
THE PATCHBAY (Continued)