User Manual

Table Of Contents

ROW SIX (Continued)

RHYTHM 3 INPUT

A control signal connected to this input sets the timing of Rhythm Generator 3

by controlling the value of the RHYTHM 3 knob, thereby selecting the integer

value (1-16) used to divide the current tempo. RHYTHM 3 knob should be

centered for the best range.

CV INPUT: -5V to +5V

RHYTHM 4 INPUT

A control signal connected to this input sets the timing of Rhythm Generator 4

by controlling the value of the RHYTHM 4 knob, thereby selecting the integer

value (1-16) used to divide the current tempo. RHYTHM 4 knob should be

centered for the best range.

CV INPUT: -5V to +5V

ROW SEVEN

SEQ 1 OUTPUT

The control signal available via this output reﬂects the value of the control

voltage created by the current step of Sequencer 1 and respects the settings of

both the QUANTIZE button and the SEQ OCT button.

CV OUTPUT: -5V to +5V

NOTE: The Sequencer outputs can be de-coupled from the Quantize setting (page 21)

and/or the Seq Oct setting (page 28).

SEQ 1 CLK OUTPUT

A clock signal based on the tempo of Sequencer 1 is available here.

CV OUTPUT: 0V to +5V

SEQ 2 OUTPUT

The control signal available via this output reﬂects the value of the control

voltage created by the current step of Sequencer 2 and respects the settings of

both the QUANTIZE button and the SEQ OCT button.

CV OUTPUT: -5V to +5V

NOTE: The Sequencer outputs can be de-coupled from the Quantize setting (page 21)

and/or the Seq Oct setting (page 28).

THE PATCHBAY (Continued)