Operating instructions

220-240VAC INPUT
(.36Amps)
110-120VAC INPUT
(.75Amps)
INPUT: (120VAC 1A
240VAC .5A)
The box is designed for either 120 or 240 VAC input
single phase. Line (L) and Neutral (N) wires should
be connected as marked on the board and
plugged into the corresponding voltage for the
input single phase.
Attach unit securely to the wall mount using (4) 3/8”
or 8mm hardware (not supplied).
WALL MOUNT:
The power box may be pole mounted with the
pole support clips. (Stainless steel straps not
provided).
10
11
12
120Vac
Input
240Vac
Input
Main
Switch
Connect incoming ground to ground post as
shown.
13