Operating instructions
2.2.7 Conguration / Network / SNMP Conguration
2.2.8 Conguration / Network / RTSP Conguration
2.2.6 Conguration / Network / API- Boujour
NOTE:
•
To control the EXO Camera system with a VMS software system, you must enable the required Network APIs. Enable PSIA
or GENETEC API depending on which VMS platform you intend to use with the device. Disabling any unrequired APIs will
accelerate boot time.
• Note: ONVIF standard is built in and does not require activation. If using ONVIF you do not need to select an API.
• Set Bonjour discovery protocol settings.
• Modify SNMP settings to match with any SNMP software you wish to use for monitoring the device.
If using Mulitcast output, Insert Multicast start IP, and select start port.
2.2.9 Conguration / Network / Multicast