Operating instructions

Open the metal power supply box on the camera

enclosure and remove cardboard packing

materials.

REMOVE INSERT

Carefully unpack both boxes and compare

with parts list.

SET-UP PROCEDURE

• See supplied Model 1001A Installation and Operation Manual for Class I Purging Set-up.

The use of a temporary SCFH flowmeter is unnecessary. Use the permanently installed flowmeter on the swing

panel in the Purge/Pressurization Unit.

• See supplied Model 1001A Installation and Operation Manual for additional installation and operation information.

CONNECTION SIZES, LENGTHS & BENDS

System Supply Camera Supply Camera Reference

3/8” OD SS Tubing SUPPLIED SUPPLIED

Fully Reamed 3/8” Poly Tubing 1/4” Poly Tubing

MAXIMUM:

100 ft MAX

20 ft / 10 bends

GAS SUPPLY

(System Supply)

CAMERA

REFERENCE

CAMERA

SUPPLY

PROTECTED

CAMERA

ENCLOSURE

PEPPERL FUCHS

PURGE/PRESSURIZATION UNIT