User manual

17
1. Make sure the Synth and Editor are connected bidirectionally.
2. Open the 'MIDI Setup' view and set the 'Editor MIDI Out' 'Program Change' to 'On'.
3. Now, when you change patches in the Editor, the Editor will be 'receiving' the patches directly from the Synth.
4. Simply scroll through patches to build your bank in the Editor.
5. Be sure to turn ' Program Change' to 'Off' when you are finished.
Using the 'Get Patch' Button
The Get Patch' function allows you to get the current 'Edit Buffer' in the Synth This may be useful if you have manually
edited the patch on the Little Phatty and need to get a 'snapshot' of the changes into the Editor. Clicking the 'Get Patch'
button after changing a patch in the Editor will appear to have no effect, but it is really just getting the same values it just
sent to the Synth, so there is no apparent change to the user.
MIDI Implementation Chart
The following MIDI data is transmitted (Tx) and Received (Rx) from the Editor and may be filtered as well...
Message Tx Rx Notes
Channel o o 1-16