Operation Manual

4
4
10mm
Place the Steam Wand (11) into the milk,
slowly turn the Steam Control (9) to on.
3
100ml -200ml
Pour 100-200ml of chilled milk into a jug.
2
Press the Steam Button, (8) wait for the Steam
Light to illuminate (5).
1
Fill the Water Tank and press the On/Off Button
(7). Wait for the Ready Light to illuminate (3).
6
Press the Steam Button to exit the steam
function. Serve the frothy milk.
5
When enough froth has been produced, turn
the Steam Control to off.
Using the Steam Wand
7
To clean, remove the wand cover and use a
wet cloth to clean the wand and cover.
8
Use a pin to clean the nozzle head, and air
holes in the cover.
47580 rev3_Layout 1 02/09/2011 13:49 Page 4