Instructon Booklet

5
Dual functionality
Upright vacuum
cleaner
Handheld vacuum
cleaner
Y
our vacuum cleaner can easily be configured
into two different cleaning modes:
• U
pright vacuum cleaner for floors and carpets.
• Handheld vacuum cleaner (13) which can be
c
arried with you whilst cleaning hard to reach
places.
Upright vacuuming: assembly
1
2
3
4
5
1 Assemble the charging cradle (16) onto the
charging cradle base
(22). Securely click it into
place.
Place the assembled charging cradle on a flat,
stable surface.
2 Swing the upright handle (4) on the main vacuum
cleaner upwards until it clicks into place in an
upright position.
3 Place the motorised floor brush (20) on a level
surface and align the connector on the neck of
the motorised floor brush with the connector hole
on the base of the main vacuum cleaner body
(7).
Holding the neck of the motorised floor brush in
place, lower the main vacuum cleaner body onto
the motorised floor brush until you hear the two
pieces click into place.
When attaching the motorised floor brush, ensure
that the latching mechanism is fully locked in
place to ensure electrical connection is made.
4 Fit the handheld vacuum cleaner (13) into the
cavity on the main vacuum cleaner body by firstly
sliding the suction end into place over the suction
hole in the main vacuum cleaner body cavity, then
push the handle end in to place until a click is
heard.
5 With the handheld vacuum cleaner in place on the
main vacuum cleaner body, insert the vacuum
cleaner into the charging cradle, ensuring that the
lip on the rear of the main vacuum cleaner body
hooks onto the notch on the concave section of
the charging cradle.
VC732007MUK Rev1.qxp_Instruction Book 25/08/2015 15:13 Page 5