Instructon Booklet

8
When not in use, the attachments may be stored
on the charging cradle base (22). Assemble the
dusting brush (3) onto the upholstery nozzle (2)
and push them onto the crevice tool (1). Then
push this assembly onto the accessory holder
(17) on the charging cradle (16).
Empty the dust canister
(14) regularly even if it
does not look full, this will maintain the
performance.
1. Remove the handheld vacuum cleaner (13) from
the main vacuum cleaner body
(7) (see ‘Handheld
vacuum cleaning’, page 7).
2. Press the dust canister release button (11) and
pull the dust canister away from the handheld
vacuum cleaner.
3. Remove the dust canister filter (15) and empty
the dirt from inside the dust canister.
Emptying the dust canister
Tool storage
Using the attachments on the handheld vacuum cleaner
Push the accessories (1) or (2) into the suction
inlet on the end of the handheld vacuum
cleaner.
Alternatively, for extra reach, attach the
accessories together and push the assembly
into the suction inlet on the end of the
handheld vacuum cleaner.
List of attachments
Crevice tool (1) for awkward places, corners
and behind radiators etc. This tool is also
useful on stairs.
Upholstery nozzle (2) for carpet, upholstery
and stairs etc.
Dusting brush (3) for carpet, upholstery and
stairs etc. The dusting brush (3) attaches to
the upholstery nozzle (2) by sliding on from
the side as shown above.
VC732007MUK Rev1.qxp_Instruction Book 25/08/2015 15:13 Page 8