manual

2 3
4
Pour the water from the kettle.
WARNING: When boiled, allow a few
seconds before pouring.
3
When boiled, the kettle will automatically
switch off. Remove from the Cordless Base.
2
Place the kettle on the Cordless Base (7) and
press the On/Off Switch (6). The Water Gauge
(5) will illuminate.
Using your kettle
1
Fill the kettle with water through either the Spout
(4) or Lid (3).
Do not fill past the MAX line.
Before using the appliance for the first time, fill
with water, boil and pour away.
1.
Open the Lid (3).
2.
Lift the Filter (9) upwards from its holder.
3.
To refit the Filter, slide it into the side wall guides
of the filter holder until it clicks into place.
WARNING: Unless the filter is fitted correctly,
the kettle lid may not close and lock securely.
Never operate the kettle without a Filter.
Removing the FilterBefore first use
43951 rev5.qxp_Layout 1 23/01/2015 10:02 Page 5