User Guide

ManualsBrandsMorphy Richards ManualsOtherIB40310

Breeze iron steam/spray/shot

Please read and keep these instructions

www.morphyrichards.co.uk

getting the best from your

new iron...

• Safety first

Caution must be used when handling this appliance as it does get

very hot. Always switch off the unit and allow to cool before

cleaning or storing.

• Jet cleaning (certain models only)

Your iron will give the best ironing results and will last longer if you

apply jet cleaning after each period of ironing.

40310 Rev 1 31/5/05 9:09 AM Page 1

Summary of content (8 pages)

PAGE 1
40310 Rev 1 31/5/05 9:09 AM Page 1 Breeze iron steam/spray/shot Please read and keep these instructions getting the best from your new iron... • Safety first Caution must be used when handling this appliance as it does get very hot. Always switch off the unit and allow to cool before cleaning or storing. • Jet cleaning (certain models only) Your iron will give the best ironing results and will last longer if you apply jet cleaning after each period of ironing. www.morphyrichards.co.
PAGE 2
40310 Rev 1 31/5/05 9:09 AM Page 2 Important safety instructions • To protect against the risk of electric shock do not put the appliance in water or in any other liquid. • Always disconnect the iron from the electrical socket when filling with water or emptying, and when not in use. • Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron, but telephone Morphy Richards for advice.
PAGE 3
40310 Rev 1 31/5/05 9:09 AM Page 3 Electrical requirements WARNING : The plug removed from the mains lead, if severed, must be destroyed as a plug with a bared flexible cord is hazardous if engaged into a live socket outlet. Should the fuse in the 13 amp plug require changing a 13 amp BS1362 fuse must be fitted. WARNING: This appliance must be earthed. Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating current).
PAGE 4
0310 Rev 1 31/5/05 9:09 AM Page 4 Components of your iron Filling 1 Make sure that the iron is not plugged in and then set the steam control ⁄ to the ‘ ’ position before filling the iron with water. 2 Lift up the fill cap and fill with water through the filling hole › using the beaker provided. A 11/2 beakers fills the tank (230 ml). After filling replace the fill cap. In hard water areas the use of distilled or demineralised water is recommended.
PAGE 5
40310 Rev 1 31/5/05 9:09 AM Page 5 C This is perfectly normal as it shows that the iron is maintaining the heat setting you have chosen. It is always a good idea to begin with cool fabrics and work up to higher settings. An iron heats up quicker than it cools down so you’ll save time and electricity. Steam No steam The steam facility should only be used on garments which are suitable for ironing at 2 and 3 dot setting.
PAGE 6
40310 Rev 1 31/5/05 9:09 AM Page 6 Maintenance Vertical steam (certain models only) Hold the iron in a vertical position between 1cm and 2cm away from the item D. Press the shot of steam button ‹, this will create vertical steam. This feature is especially useful for removing creases from hanging clothes, D curtains, wall hangings etc. Note: For optimum steam quality, do not operate the shot more than three times in succession.
PAGE 7
40310 Rev 1 31/5/05 9:09 AM Page 7 Helpline If you have any difficulty with your appliance, do not hesitate to call us. We are more likely able to help than the store from where you bought it. Please have the following information ready to enable our staff to deal with your query quickly. • Name of the product • Model number as shown on the underside of the appliance.
PAGE 8
40310 Rev 1 31/5/05 9:09 AM Page 8 Your two year guarantee It is important to retain the retailers receipt as proof of purchase. Staple your receipt to this back cover for future reference. Please quote the following information if the product develops a fault. These numbers can be found on the base of the product. Model no. Serial no. All Morphy Richards products are individually tested before leaving the factory.