Specifications

SUPPLEMENTARY INSTALLATION INSTRUCTIONS FOR USE
WITH MORSØ UK STOVES
PLEASE READ THE INSTRUCTION MANUAL AND THESE SUPPLEMENTARY
INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
In all cases the installation must comply with current Building Regulations, Local Authority Byelaws
and other specifications or regulations as they affect the installation of the stove.
It should be noted that the Building Regulations requirements may be met by adopting the relevant
recommendations given in British Standards BS 8303, BS EN 15287 and BS 7566 as an alternative
means to achieve an equivalent level of performance to that obtained following the guidance given in
Approved Document J.
Please note that it is a legal requirement under England and Wales Building Regulations that the
installation of the stove is either carried out under Local Authority Building Control approval or is
installed by a Competent Person registered with a Government approved Competent Persons Scheme.
HETAS Ltd operate such a Scheme and a listing of their Registered Competent Persons can be found
on their website at www.hetas.co.uk.
CO Alarms:
Building regulations require that when ever a new or replacement fixed solid fuel or wood/biomass
appliance is installed in a dwelling a carbon monoxide alarm must be fitted in the same room as the
appliance. Further guidance on the installation of the carbon monoxide alarm is available in BS EN
50292:2002 and from the alarm manufacturer’s instructions. Provision of an alarm must not be
considered a substitute for either installing the appliance correctly or ensuring regular servicing and
maintenance tof the appliance and chimney system.
Cast iron
Cast iron is a live material. There are no two ovens that are identical. This is partly due to the tolerances
of the casting process, partly because the ovens are a work of craftsmanship.
Health and Safety Precautions
Care must be taken when installing the stove such that the requirements of the Health and Safety at Work
Act are met.
Handling
Adequate facilities must be available for loading, unloading and site handling.
Stove weights including packaging
Model N°
Weight
Kg
Model N°
Weight kg
Model N°
Weight kg
Model N°
Weight
Kg
Model
N°
Weight
Kg
1410
70
3410
110
7470
108
S10-40
98
Ø6
112
1412
70
3440
127
7940
152
S11-70
102
Ø8
145
1430
72
3610
220
7943
162-174
S11-40
76
1440
90
6140
105
7948
156
S11-42
73
1442
90
6148
118
7970
135
S11-43
82
1630
145
7110
140
7990
189
S11-90
96
2110
115
7440
105
8140
165
S50-40
169
2140
140
7442
116
8141
192
S80-90
165
3112
95
7443
109
8142
190
S81-90
77
3142
113
7448
110
8147
204
Ø4
86
Fire Cement
Some types of fire cement are caustic and should not be allowed to come into contact with the skin. In
case of contact wash immediately with plenty of water and consult manufacturers guidelines.
Asbestos
Morsø stoves do not contain asbestos. If there is a possibility of disturbing any asbestos in the course of
installation then please seek specialist guidance and use appropriate protective equipment.
In the UK these stoves have been approved by HETAS Ltd as an intermittent operating appliance for
burning wood logs only.
It should be noted that it is an offence to burn wood logs in a stove if it is installed within a Smoke
Control Area in the UK unless the stove is approved to do so. The nominal heat outputs for the various
stoves are as follows:
Model
N°
Nominal Heat Output
KW
Net Eff
%
Gross Eff
%
Model
N°
Nominal Heat Output
KW
Net
Eff %
Gross
Eff %
1410
4,5
76
69,2
7943
7,3
79
71,9
1412
5
74.6
67,9
7948
7,3
79
71,9
1430
4,6
71
64,6
7970
7,3
79
71,9
1440
4,5
76
69,2
7990
7,3
79
71,9
1442
5
74.6
67,9
8140
6,3
80.3
73,3
1630
10,5
74
64,3
8141
6,3
80.3
73,3
2110
9
72
65,5
8142
6,3
80.3
73,3
2140
5,6
76
69,2
8147
6,3
80.3
73,3
3112
5
81
73,7
S10-40
5
81,3
74
2 3