MORTCH INTERNATIONAL LIMITED TANCO User’s Manual
MORTCH INTERNATIONAL LIMITED Preface ht w w :// tp Thank you very much for purchasing our scooters. And welcome to join the driver’s line of MORTCH motorcycle. With its extraordinary advantages of excellent quality, smart appearance and shape of legerity, our product will surely bring the utmost pleasure and convenience to your life. This manual gives you information about the general structure, function, operation and maintenance methods of TANCO.
MORTCH INTERNATIONAL LIMITED CONTENTS ht 1 …………………………………………………………………………………… 3 …………………………………………………………………………………………… Position of parts w :// tp Guidance Controlling parts ……………………………………………………………………………………… Fuel tank 4 …………………………………………………………………………………………… 6 Starting pedal ………………………………………………………………………………………… 6 Pre-riding inspection ………………………………………………………………………………… 7 ……………………………………………………………………………………… 8 Running-in …………………………………………………………………………………………… 9 Regular maintenance ………………………………………………………………
MORTCH INTERNATIONAL LIMITED □Guidance ht Please keep safety in your mind and observe the regulations of transportation while enjoying your riding. Pay attention to Pre-riding inspection w :// 1. tp the following rules: Helmet .m w 2. w Please read the details in the relevant chapter for your safety. Do remember to wear helmet while riding. 3. WARNING Being familiar with motorcycle operation or It is of great importance to ensure your safety getting familiar 4. h.
MORTCH INTERNATIONAL LIMITED 5. Positions of the numbers ht The frame number and the engine number are for the purpose of tp registering the motorcycle. When your motorcycle needs w :// inspection, repair or other special service, the number will enable you to get good service from our sale agency. Please note down w your number here: h. tc or .
MORTCH INTERNATIONAL LIMITED □ Position of parts w w :// tp ht or .m w (7) Seat lock (8) Left rear turning light (9) Starting pedal (10) Muffler (11) Right rear turning light (12) Rear light (20) Ignition switch (23) Brake disc h.
MORTCH INTERNATIONAL LIMITED □ Controlling parts tp ht 1. Rear brake lever Hold it tightly and the rear brake works. 3. Left turning light Right turning light C. Switch for high/low beam lights Meters and indicating lights w w :// A. Indicates the speed in km/h and Mph or .m w 2. Switches on the left h. tc B. Indicates total distance the motorcycle has run C. Left turning light indicator D. High beam indicator m co E. Right turning light indicator F. Fuel gauge A. Horn button B.
MORTCH INTERNATIONAL LIMITED 4. Front brake lever Hold it tightly and the front brake works. brake and press the electric starting button and then the engine starts. ht w :// tp 6. Ignition switch w ---OFF .m w 5. Switches on the right ---ON ---LOCK or h. tc ON: Engine can be started and all the lights can be operated. The key cannot be taken out. OFF: The whole circuit is cut. Engine and lights cannot be operated and the key can be taken out.
MORTCH INTERNATIONAL LIMITED □Fuel tank □Fuel and engine oil w :// tp ht Usage of the fuel tank lock: 1. Turn the little cap on the fuel cap clockwise. Insert the key and turn the key clockwise and take out the fuel cap. 2. Align the lock tongue on fuel cap with the notch on fuel tank, press the fuel cap and lock it. A. Gasoline High quality fuel is essential to the engine. Any sand in the fuel is absolutely prohibited. 90# or higher quality lead-free gasoline is preferred. B.
MORTCH INTERNATIONAL LIMITED □Pre-riding inspection ht Please check the following parts before you drive. Items Inspection content w :// tp No. 1 Steering handlebar 1.Flexibility 2.No gap or loosing appearance 2 Brake system 3 Tires 1.Proper pressure 4 Fuel Sufficient fuel 5 Engine oil Sufficient engine oil 6 Lights Workable 7 Horn Workable 8 Gear oil With normal stock 9 Throttle 1. Proper gap 10 All the bolts and nuts No loosing appearance. 1.
MORTCH INTERNATIONAL LIMITED □Engine starting 1. Please check the volume of engine oil and gasoline before starting. The main stand and the side stand should be taken back while starting the engine. 2. Turn the ignition switch to the “ON” position. ---OFF .m w PUSH ---ON w w :// tp ht 3. Engine Starting Grip the brake lever and press the starting button and then the engine will be started. ---LOCK h.
MORTCH INTERNATIONAL LIMITED Warning Warning ht ◆ After the engine started, the starting pedal should be taken back to its original position. Otherwise, it will affect the driver’s safety. ◆ Please don’t start the engine in unventilated places, because the wasted gas with CO is harmful to human being. w w :// tp ◆ 5 seconds is the maximum limit for each starting and10 seconds is the minimum interval. ◆ Stop pressing the starting button immediately after the engine starts.
MORTCH INTERNATIONAL LIMITED □Regular maintenance ht w w :// tp 1000 3000 6000 12000 Interval Km 300 Item Month New motor 1 3 6 12 Battery I I I I I Engine oil strainer C C Gasoline strainer R Carburetor I I I C Air cleaner core Clean it every 2000km and replace it when necessary Spark plug Clean it every 3000km and replace when necessary Fuel throttle A A A A Drive belt I I Engine oil R R Replace every 3000km Brake system I I I I I Front fork and steering stem bearing I I I I Suspension I I I I Tires
MORTCH INTERNATIONAL LIMITED 1. Battery 12V/5.7Ah battery ① When the voltage is less than 11.5V, please use kick starting in stead of electric starting. ② Put the ignition switch on OFF position before battery replacement. Warning w :// tp ht ◆ It has been fully adjusted to the highest position when manufactured. 3. Air cleaner w ③ Electrode identification: “+”— red line, “-”—green line. ④ Change a new battery every 4 years. or .m w 2.
MORTCH INTERNATIONAL LIMITED 5. Fuel Refill the recommended 90# or higher quality lead-free gasoline when the indicating needle in the fuel gauge points to the red area. NOTE: Lead-free gasoline will extend the life of spark plug and catalytic converter. w w :// tp ht palms. Never twist it in case that it is broken. ③ Immerse the core into engine oil. ④ Squeeze the excessive oil out but keep it lightly oil immersed. If it has been damaged, please replace a new one.
MORTCH INTERNATIONAL LIMITED ②The rear brake (drum brake) Turn the adjusting nut to get a proper travel. w :// tp ht ① Remove the oil dipstick. ② Remove the oil plug for displacement to drain the used oil. ③ Reinstall the oil plug for displacement, paying attention to be tightened . ④ Refill 0.8 L recommended fresh engine oil. ⑤ Fasten all the nuts and screws.
MORTCH INTERNATIONAL LIMITED ◆Brake oil level ① It has been filled with the special brake oil before the motorcycle leaves the factory. User should fill or replace the qualified brake oil (such as No.DOT3 or DOT4 brake oil) from the appointed maintenance station. Never replace or mix other oil, otherwise it would damage the brake system. ②If the brake oil is insufficient, it might be possible for the air to come into the brake system and result in the failure of the system.
MORTCH INTERNATIONAL LIMITED 8. Tires Insufficient tire pressure hastens wear of them and affects the riding stability. Please check the tire pressure and tread depth when applying regular maintenance. ①Tire pressure: front 250 KPa, rear 250 KPa. ②Tread depth: It is suggested to replace a new tire when the tread depth is less than l mm. tp ht 9. Starting motor Check the fastening bolts and the carbon brush, and replace them if necessary.
MORTCH INTERNATIONAL LIMITED How to change gear oil z Stand up the main stand. z Take off the oil plug for refill. z Take off the oil plug for draining, let off all the dirty gear oil. z Tighten the oil plug for draining. z Refill fresh gear oil and tighten the oil plug for refill. □Tools A full set of tools is offered for your daily use. w w :// tp ht h. tc or .m w <18> m co After refilling, please make sure you have locked the oil plugs and bolts.
MORTCH INTERNATIONAL LIMITED □Technical Parameters 1850mm 680mm 1150mm 1300mm 88kg±3kg 242kg w w :// Weight Specifications tp ht Size Items Length Width Height Wheel base Unloaded weight Mass weight 45km/h or 30km/h or 25km/h ≥6° A7RC 12V/5.7AH 10A 12V 35/35W 12V 10W 12V 10W 12V 21/5W 12V 5W 4L±0.5L 1L h. tc or Circuit system Max. Speed Slope Spark plug Battery Fuse Headlight Front turning lights Rear turning lights Brake light Position lights .
MORTCH INTERNATIONAL LIMITED Specifications Engine w w :// tp ht Items Model Type Cylinder Bore and stroke Cylinder volume Compression ratio Max. Power Max. Torque Carburetor Air cleaner Ignition type Starting mode Cooling mode Lubrication Brake system Front shock absorber <20> m co Rear shock absorber Tires h. tc or .m w Suspension 139QMA 4 stroke 1 39mm×41.4 mm 49cm3 10.5±0.3:1 2.61 kW/8000r/min 3.
MORTCH INTERNATIONAL LIMITED □Circuit Diagram w w :// tp ht h. tc or .
