MAN U A L CM- 2 0 MOTION Wi-Fi bridge English
The MOTION Wi-Fi bridge is the heart of your automated blinds network at home. The bridge unlocks endless possibilities to operate blinds with the MOTION app. Cloud connections with leading smart home applications enable voice control and a variety of smart automation options. Max. blinds Scenes Timers Frequency 30 20 20 433 MHz 2.
FCC Manual I FCC ID: ZY4CM20 Regulatory Information 1 FCC Information for User This product does not contain any user-serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals. 2 FCC Electronic Emission Notices This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2.
1 Download the app and create an account 2 Power the bridge The MOTION Wi-Fi bridge needs to be set up with the MOTION Blinds app before installation on the wall or ceiling. Download the MOTION Blinds app from the App Store or Google Play with your smartphone or tablet. Open the MOTION app and create an account. There is no charger included with this product. Any universal DC 5V 1A micro-USB charger can be used to power the MOTION bridge.
3 Connect the bridge to a Wi-Fi network An active internet connection is required to add the MOTION bridge to your home Wi-Fi network. Choose a location for the MOTION bridge in your home. Connect your smartphone or tablet to your home Wi-Fi network to check the strength of the Wi-Fi signal at this location. To avoid interference please make sure the MOTION bridge is located at least one meter away from any other Wi-Fi devices, including your router. 3G/4G 3.1 Video MOTION app: how it works rtube.
3.4 Make sure the MOTION bridge is powered ON. Open the Wi-Fi settings of your mobile device and connect to the Wi-Fi network you want to connect the MOTION bridge with. 3.5 Return to the MOTION Blinds app and enter the password of the Wi-Fi network. 3. CONNECT THE BRIDGE TO A WI-FI NETWORK 3.6 Press and hold the ‘Set’ button on the MOTION bridge until the LED on top of the bridge starts to flash purple. Go to the app and press ‘Connect’. Now a MOTION Wi-Fi network is created by the bridge. 3.
Before adding a blind to the MOTION bridge, the end positions of the blind must be programmed with a remote control. 4 Add a blind Program button on motor 4.1 Go back to the start screen in the app and open your location. 4.2 Navigate to ‘Blind’ and press the ‘+’ button to add a new blind. (Make sure your blind has a top and bottom position programmed. If your blind does not have end positions please program first.) 4. ADD A BLIND 4.3 Choose the blind type and follow the setup wizard.
5 Roller/ Honeycomb/ Roman blind control Blind position Press to move the blind 6 Double roller control Power indicator Power indicator Edit blind Edit blind Blind position Press to move the blind Hold and slide to set the favorite position. Tap to move the blind to the favorite position Blind position Press to move the blind Blind position Press to move the blind Hold and slide to set the favorite position.
7 Top-down/Bottom-up control 8 Venetian control Power indicator Power indicator Edit blind Edit blind Blind position Press to move the blind Blind position Press to move the blind Blind position Press to move the blind Blind position Press to move the blind Tilt control Press to tilt Tilt control Press to tilt Mid rail position Slide to move the mid rail to any position Hold and slide to set the favorite position.
9 Create a room Add blinds to a room to control individual blinds or all blinds in a room at the same time. Shortly click on a room to see/control all the blinds in this room Scenes can be created to move your blinds to preset positions. 10 Create a scene Edit scenes Position slider Swipe right to edit Target Position Swipe left to delete Play scene Add room 9.1 Press the ‘+’ button to add a new room. 9.2 9. CREATE A ROOM Click and hold on a room and control all the blinds to a certain postion.
Timers can be created to automate blinds and scenes to make the home seem inhabited. 11 Create a timer 12 Connect to third party The MOTION bridge allows to seamlessly connect motorised blinds to smart home applications. Scan the QR code below to discover the third party connections. Edit timers Swipe right to edit Swipe left to delete Turn on/off timer Add new timer Third party Discover third party connections for MOTION blinds rtube.nl/red1062 11. CREATE A TIMER 12.
13 Frequently Asked Questions Problem Cause Solution Motor battery is empty Charge the motor. See the manual of your motor Radio interference / shielding Blind is not responding Make sure that the bridge/antenna of the motor is out of the way from metal objects The distance from the bridge to the motor is too far Move the bridge closer to the blind The bridge is turned off Power the bridge Wrong password Start the setup wizard again and use the right password.
CM20U-R2 motion-blinds.
