User Manual

Problem Cause Solution

Blind is not responding

Motor battery is empty

Charge the motor. See the manual of your

motor

Radio interference / shielding Make sure that the bridge/antenna of the

motor is out of the way from metal objects

The distance from the bridge to

the motor is too far

Move the bridge closer to the blind

The bridge is turned off Power the bridge

Can not pair your bridge

Wrong password

Start the setup wizard again and use the

right password. The password is case

sensitive

Router does not give an IP

address to the bridge

Press and hold the reset button for 10

seconds. The center LED indicator will be

RED. Retry to add the bridge

Frequently Asked Questions

13. FREQUENTLY ASKED QUESTIONS

system, or transmitted, in any form, by any means, electronic, mechanical, photocopying,

recording, digital or otherwise without the written permission of the publisher.

Although this manual has been composed with the utmost care, Coulisse b.v. does not

accept any responsibility for damage due to mistakes and/or faults in this manual.

Coulisse b.v. reserves the right to revise the manual and to revise and/or change its

content at any time, without obligation to notify any person or entity of such revisions

or changes.