Specifications

Removing the head cover
NOTE
THE OPERATIONS DESCRIBED BELOW REFER TO REMOVING ONLY ONE HEAD BUT APPLY
TO BOTH HEADS.
•
Disconnect the spark plug tube.
•
Undo and remove the four head cover
fixing screws and collect the sealing O-
rings.
•
Remove the head cover together with
the gasket.
Removing the cylinder head
CAUTION
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
•
Remove the head cover.
•
Undo and remove the two screws
•
Remove the cap.
Engine GRISO 8V - 1200
ENG - 128
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten