Specifications

Installing the overhead camshaft
•
Place the bowls in the cam cap, if those
previously removed are refitted be
careful not to interchange them.
•
Place the camshaft with the gear seat
on the dowel side.
•
Place the U-bolt on the camshaft mak-
ing sure the two reference pins match
the seats on the cam cap.
•
Tighten the four screws operating di-
agonally and in stages.
Timing
GRISO 8V - 1200 Engine
ENG - 137
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten