Specifications
•
Place the gear on the oil pump shaft.
•
Place the washer on the oil pump shaft.
•
Tighten the nut to the specified torque.
•
Place the oil pump control gear on the
crankshaft and align its reference with
that marked during the removal phase
on the oil pump driven gear.
•
Tighten the nut to the specified torque.
•
Tighten the screw with the washer to
the prescribed torque.
See also
Installing the crankshaft
Installing the service shaft
Measuring air gap
GRISO 8V - 1200 Engine
ENG - 143
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten