Specifications
Name Torque in Nm
Oil radiator spacer (1) 50 Nm (36.88 lbf ft)
Oil radiator fixing screws - M8x40 (3) 25 Nm (18.44 lbf ft)
Screws fixing oil radiator grille - TBEI M5x12 (4) 4 Nm (2.95 lbf ft)
Screws fixing oil radiator air deflector - TE M6x30 (3) 10 Nm (7.38 lbf ft)
CHASSIS TO ENGINE UNIT
Name Torque in Nm
M6x40 TCEI DA screw 8 -12 Nm
Reduction 20 Nm
FUEL SUPPLY CONTROL UNIT
Name Torque in Nm
M5x12 TCEI screw 6 -7 Nm
Stainless steel M5x16 TBEI flanged screw 6 -7 Nm
M6x25 TCEI DA screw 8 -12 Nm
CHASSIS
Name Torque in Nm
Front engine to chassis retainer 80 Nm
Transmission to chassis retainer (M12x250 + M12x230) 50 Nm
Right fixing plate - transmission retainer 25 Nm
Plate clamp - blow-by retainer 10 Nm
Coil plate retainer 10 Nm
Electronic control unit retainer 10 Nm
Bushings to electronic control unit retainer 10 Nm
Retainer for tank to chassis rear support rubber rings Manual
Filter casing fixing bolts 10 Nm
Left and right footrest plate to chassis upper retainer 25 Nm
Left and right footrest plate to chassis lower retainer 18 Nm
Brake switch on plate retainer Manual
Plate ring to plate retainer 6 Nm
Retainer for cable guide on right footrest plate 6 Nm
FOOTRESTS AND LEVERS
Name
Torque in Nm
Footrest rubber retainer 10 Nm
Rider footrest sliding pin - M8 25 Nm
Passenger footrest support to lateral plates retainer 38 Nm
Rider heelrest to plates retainer 6 Nm
Passenger heelrest retainer 3 Nm
Rod retainer (nut) 10 Nm
Gear shift lever / brake pin retainer 10 Nm
Gear shift lever / pre-selector retainer 10 Nm
Gear shift lever - brake pin retainer 15 Nm
SIDE STAND
Name
Torque in Nm
Stand plate to engine upper retainer 50 Nm
Stand plate to engine lower retainer 25 Nm
Side stand retainer pin 10 Nm
Switch fixing screw 10 Nm
Lock nut 30 Nm
Stand cable guide to engine retainer 50 Nm
Lateral lever arm retainer 10 Nm
SWING ARM
Name
Torque in Nm
Fork on bushing clamp retainer 10 Nm
Fork on bevel gear pair retainer 50 Nm
Reaction rod to bevel gear pair retainer 50 Nm
Reaction rod to chassis retainer 50 Nm
Fork bolt to fork retainer 60 Nm
Characteristics GRISO 8V - 1200
CHAR - 16
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten