Specifications

PAY ATTENTION TO CRANKSHAFT ROTATION WHEN ONLY THE CONNECTING RODS ARE
FITTED BECAUSE IT COULD HIT THE TWO LUBRICATION JETS INSIDE THE CRANKCASE.
Installing the crankshaft
•
Fit the shim washer inside the crank-
case with the chamfered side facing
the generator side.
•
Lubricate the crankshaft bushing on
the crankcase, generator side.
•
Use the sealing ring fitting tool on the flywheel-side flange to fit the sealing ring on the flange.
Specific tooling
19.92.71.00 Tool to fit the sealing ring on the flywheel-side flange
•
Fit a new gasket between the crankcase and the crankshaft flange, flywheel side.
•
Fit the crankshaft on the crankcase,
flywheel side.
•
Mark the crankshaft on the flywheel
side with the crankpin facing upwards.
•
Place the suitable sealing ring centring
tool on the crankshaft.
Specific tooling
12.91.20.00 Tool to fit the flywheel-side flange
together with sealing ring on the crankshaft
Engine GRISO 8V - 1200
ENG - 160
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten