Specifications

•
Place the driving pin on the oil pump
shaft.
•
Place the gear on the oil pump shaft.
•
Place the washer on the oil pump shaft.
•
Tighten the nut to the specified torque.
•
Place the oil pump control gear on the
crankshaft and align its reference with
that marked during the removal phase
on the oil pump driven gear.
•
Tighten the nut to the specified torque.
Engine GRISO 8V - 1200
ENG - 166
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten