Specifications

•
Insert the joint in the oil pump.
•
Fit the nipple with the gasket on the
crankcase.
•
Tighten the nipple to the prescribed
torque.
Removing the oil sump
NOTE
TO REMOVE THE OIL SUMP, PLACE A SUITABLE CONTAINER UNDER IT TO COLLECT THE
USED OIL AND DRAIN OUT ALL OIL.
•
If necessary, the filter can be removed with the suitable special tool.
Specific tooling
01.92.91.00 Wrench for removing the cover on sump and filter
•
Unscrew and remove the oil level plug
and collect the O-Ring.
GRISO 8V - 1200 Engine
ENG - 167
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten