Specifications
•
Position the lower spacer and the
washer.
Filling oil
•
Place the sleeve upright in a vice fitted
with protection shoes.
•
Compress the sleeve in the stem.
•
Pour part of the fork oil into the sleeve.
•
Wait for some minutes until the oil fills
all the ducts.
•
Pour the oil left.
•
Pump out oil a few times.
•
Measure the air gap between the oil
level and the rim.
THE SLEEVE MUST BE PERFECTLY UPRIGHT FOR A
CORRECT OIL LEVEL MEASUREMENT. THE OIL LEVEL
MUST BE THE SAME IN BOTH STEMS.
Characteristic
Fork oil
520 ± 2.5 cm³ (31.7 ± 0.15 in) (for each stem)
Oil level (from sleeve rim, without the spring
and preloading pipe)
110 mm (4.33 in).
GRISO 8V - 1200 Suspensions
SUSP - 201
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten