Specifications

Installing
•
Spread a thin layer of lubricating
grease all along the fork pin.
•
Fit the ring nut in the fork pin and screw
it manually.
•
Working from both sides, grease the
cardan shaft cables with the recom-
mended product from the recommen-
ded products table.
•
Block the fork, insert the universal joint,
align the holes and, at the same time,
helped by a second operator, insert the
pin completely.
•
Tighten the fork pin.
•
Use the suitable box-spanner to tight-
en the ring nut.
Specific tooling
05.91.26.30 Tool for tightening the fork pin ring
nut - clutch hub
•
Tighten the two fork terminal screws.
Chassis GRISO 8V - 1200
CHAS - 216
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten