Specifications

REMOVAL
Remove the bushing (1) with a punch.
Turn the support (5) over and remove the other
bushing (8).
Remove the sealing rings (2) and (7) with a screw-
driver.
Remove the stop rings (3) and (6) from the support
(5) with suitable pliers.
NOTE
THIS OPERATION DESTROYS THE SEALING RING.
Remove the ball joint (4) with a suitable buffer and
a rubber hammer.
FITTING
Fit the stop ring (6) in the support (5) with suitable
pliers.
Chassis GRISO 8V - 1200
CHAS - 220
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten