Specifications

•
Unscrew and remove the filler plug (1).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and if necessary, replace the
sealing washers of drainage plug (2).
•
Remove any metal scrap attached to
the drainage plug (2) magnet.
•
Screw and tighten the drainage plug
(2).
•
Pour new engine oil until it goes above
the minimum level marked "MIN".
•
Screw the filler cap (1).
Engine oil filter
Replace the engine oil filter each time you
change the engine oil.
•
Drain off the engine oil completely.
•
Unscrew and remove the engine oil fil-
ter from its seat.
NOTE
NEVER REUSE A FILTER.
•
Spread a thin layer of oil on the sealing ring of the new engine oil filter.
•
Fit and screw the new oil filter in its seat.
See also
Replacement
Gearbox Oil
Inspection
CHECKING AND TOPPING UP
CAUTION
ENGINE MUST BE WARM TO CHECK GEARBOX OIL LEVEL.
NOTE
DO NOT LET THE ENGINE IDLE WITH THE VEHICLE AT STANDSTILL TO WARM UP THE ENGINE
AND REACH THE OPERATING TEMPERATURE OF ENGINE OIL. OIL IS BEST CHECKED AFTER
RUNNING FOR ABOUT 15 KM (10 miles).
GRISO 8V - 1200 Maintenance
MAIN - 35
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten