Specifications
•
Undo and remove the two screws and
collect the washers.
•
Remove the starter motor cover.
•
Unscrew and remove the stud bolt.
•
Disconnect the ground leads.
•
Disconnect the starter motor connec-
tors.
•
Undo and remove the three screws
and remove the clutch control cylinder.
•
Lock the cylinder using a clamp to pre-
vent oil leaks.
•
Slide off the gearbox oil breather pipe.
GRISO 8V - 1200 Engine from vehicle
ENG VE - 83
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten