Specifications

•
Working on both sides, release the
clamp and slide off the engine oil
breather pipe.
•
Undo and remove the two screws fixing
the oil vapour union.
•
Remove the oil vapour union.
•
Disconnect the stand sensor connec-
tor and release it from the clamps.
•
Undo and remove the two screws and
remove the control unit protection.
•
Undo and remove the two screws and
move the control unit downwards.
Engine from vehicle GRISO 8V - 1200
ENG VE - 84
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten