Specifications

•
Undo and remove the screws and
move the oil vapour recovery reservoir.
•
Unscrew and remove the stud bolt.
•
Slide off the oil pipe from the blow-by
tank and keep it fitted to the oil sump.
•
Slide off the blow-by tank from the two
hooks on the chassis.
•
Working from both sides, undo and re-
move the three inlet manifold screws.
•
Collect the gasket.
•
Remove both footrest holding plates.
•
Unscrew and remove the engine lower
fixing nut and collect the washer.
•
Remove the lower bolt and collect the
washer.
GRISO 8V - 1200 Engine from vehicle
ENG VE - 85
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten