Specifications

•
Undo and remove the two screws and
collect the cable guide.
•
Remove the plate.
CAUTION
PERFORM THE OPERATIONS BELOW HELPED BY A SEC-
OND OPERATOR.
•
Working on both sides, undo and re-
move the front screw and collect the
washer.
•
Unscrew and remove the engine upper
fixing nut and collect the washer.
•
Remove the upper bolt and collect the
washer.
•
Lower the engine partially.
•
Disconnect the oil pressure sensor
connector.
•
Lower the engine completely.
•
Lift the rear part of the vehicle.
•
Release the front belts.
•
Hold the rear part of the vehicle, re-
move the chassis from the engine.
See also
Exhaust
Removing
Fuel tank
Engine from vehicle GRISO 8V - 1200
ENG VE - 86
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten