Specifications

•
Working from the left side, fit the en-
gine lower bolt with the washer.
•
From the opposite side, fit the washer
and tighten the nut.
•
Working on both sides, tighten the front screw to the prescribed torque.
•
Tighten the stud bolt.
•
Place the oil vapour recovery reservoir
and tighten the screw.
•
Fit the control unit and tighten the two
screws.
•
Fit the control unit cover and tighten the
two screws.
Engine from vehicle GRISO 8V - 1200
ENG VE - 88
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten