® Model no. 011-1967-8 PRECISION SERIES BATTERY CHARGER s bs IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating instructions.
headline bars 3 ® Model no. 011-1967-8 Questions? Contact us 1-888-942-6686 2 Introduction 4 Safety 4 Connecting Your Battery 6 Controls and Indicators 8 Charging Your Battery 10 Understanding Factors That Affect Charging Time Maintenance and Care Troubleshooting Technical Specifications warnings 3069523 This MotoMaster Eliminator product carries a five (5) year warranty against defects in workmanship and materials.
4 headline bars 5 ® Model no. 011-1967-8 Questions? Contact us 1-888-942-6686 • IMPORTANT SAFETY INSTRUCTIONS • • • SAFETY • • INSTRUCTIONS. Read all instructions, warnings, and cautions printed on the battery charger, battery and vehicle or equipment using battery. DO NOT expose charger to rain or snow. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
6 headline bars 7 ® CONNECTING YOUR BATTERY • • • • Locate charger as far away from battery as DC cables pemit. Never place charger directly above battery being charged; gases from battery will corrode and damage charger. Never allow battery acid to drip on charger when reading electrolyte specific gravity or filling battery. Do not operate charger in a closed-in area or restrict ventiation in any way. Do not set a battery on top of charger.
8 headline bars 9 ® continuation tabs This battery charger has an easy-to-follow 4-LED charge status indicator: 25%, 50%,75%,100%. This indicator provides an estimate of the battery’s state of charge as charging progresses. During charging, the corresponding state of charge LED will be flashing. When the 100% LED lights solid (i.e., stops flashing), the battery is fully charged and the charger has entered the Maintain stage (see Understanding the Multi-stage Charging Process). warnings B.
11 ® Model no. 011-1967-8 Questions? Contact us 1-888-942-6686 If a lead-acid battery is left sitting in a low state of charge, or is deeply discharged, or is never given the opportunity to fully charge, it can suffer capacity loss due to sulphation and/or stratification. Such a battery can appear to have a normal open circuit voltage and yet it will have a noticeable drop in performance.
12 ® • Wipe clean cords and clamps after each use. • Store the power and output cables neatly to prevent damage. continuation tabs • • The charger housing may be cleaned using a damp cloth and mild cleaning agent. Always unplug the charger when not in use. Keep the charger stored in a cool, dry place. notes No LEDs illuminate when plugged into AC outlet. warnings warnings Amber (solid) fault LED is illuminated. Red (solid) fault LED is illuminated.
