Network Router User Manual

Mesh Enabled Access EWR/PWR Users Guide

2.3 Equipment Requirements

An EWR6300 and a PWR6300 are utilized similarly to a subscriber device within a MEA

network. Both will be used with the following Motorola’ infrastructure devices: IAP6300 and

MWR6300.

2.3.1 EWR6300

The following list defines the standard MEA hardware components needed to set up a EWR:

• EWR Box with N-type Antenna Connector

• 120V A/C Power Cable with a NEMA 5-15 plug

• Antenna with N-type Male Antenna Connector

• Mounting Bracket

The Network Operator must supply the following:

• Mounting Location

• Power Source (120V A/C or 5 V D/C depending on EWR configuration)

• Hand tools for bracket installation (7/16” wrench (2), Phillips screwdriver)

Optional Equipment:

• DC powered EWR (EWR6300-DC-IN)

• Power cord to connect to a photoelectric cell

2.3.2 PWR6300

The following list defines the standard MEA hardware components to install a PWR:

• PWR Box with N-type Antenna Connector

• 15 feet cable assembly

• Mounting Bracket

The Network Operator must supply the following:

• Mounting Location

• Power Source (12 VDC)

• Hand tools for bracket installation

Optional Equipment:

• An Antenna Cable and connector